; This is startup for paret.w0rli

; *** Conditional startup.

Set home     true

; What TNCs are connected?

Set de56a    true
Set de56b    true
Set kpc1     true

Set rtegresh false

; *** Basic setup.

; System identification:
;   host name, IP address, AX.25 and NET/ROM callsigns:

ip     address   44.116.1.20
domain name      paret.w0rli.ampr.org
mbox   haddress  w0rli.or.usa.noam
ax25   bbscall   rlimb:w0rli    ; BBS callsign and outgoing connects.
ax25   mycall    paret:w0rli-1  ; Node call.

log expire on
log ftp    on
;log http   on
;log nntp   on
log pop    on
log proc   on
log rt     on
;log shut   on
;log start  on

expire bull 15
netrom minqual 83
netrom retry 5
nw avoid w1ngl-2
nw avoid wb7awl-10
netrom ignorebc ax4 ka7upd-1
netrom ignorebc ax4 w7trr-1

If home
domain add silver 5
Else
domain add cedar 10
EndIf

mbox lid w1ngl
mbox lid wa7v
mbox lid n7fsp

netrom ignore w1ngl-1
netrom ignore w1ngl-2
netrom ignore w1ngl-3
netrom ignore w1ngl-4
netrom ignore n7fsp-10

; *** Interfaces.

; Ethernet.

attach packet et1 0x60 1520
ifconfig description et1 "House Ethernet"
ifconfig netmask     et1 255.255.255.224
tcp      retries     et1 10

attach bpqenet ax1 0x60 256
ifconfig description ax1 "House Ethernet"
ax25 speed           ax1 64000

; Serial ports.

attach com s1 0xd800 12 1280 64 19200 950
ifconfig description s1 "s1"

attach com s2 0xd808 12 1280 64 19200 950
ifconfig description s2 "s2"

attach com s3 0x3f8  4 1280 64 19200
ifconfig description s3 "s3"

attach com s4 0x2f8  3 1280 64 9600
ifconfig description s4 "s4"

; Kantronics Data Engine.

If de56a

attach kiss ax2 s1 0 256
ifconfig description ax2 "441.500 to CEDAR,  9600 baud"
ax25 speed    ax2 9600
kiss TxDelay  ax2  150

attach kiss ax3 s1 1 256
ifconfig description ax3 "434.950 to PDX7,   9600 baud"
ax25 speed    ax3 9600
ax25 quality  ax3  220

EndIf

; Kantronics Data Engine.

If de56b

attach kiss ax4 s2 0 256
ifconfig description ax4 "430.550 to BVRCRK, 9600 baud"
ax25 speed    ax4 9600

attach kiss ax5 s2 1 256
ifconfig description ax5 "424.750 to WVILLE, 9600 baud"
ax25 speed    ax5 9600

EndIf

; Kantronics KPC9612.

If kpc1

attach xkiss ax6 s3 0 256
ifconfig description ax6 "145.530 to HCKNSN, 1200 baud"
;ifconfig mtu  ax6  160
ax25 speed    ax6 1200

attach xkiss ax7 s3 1 256
ifconfig description ax7 "No Radio, 9600 baud"
ax25 speed    ax7 9600

EndIf

;attach kiss ax8 s4 0 256
;ifconfig description ax8 "oats"
;ax25 speed    ax8 57600

; ***

tcp irtt netrom 30000

; Monitoring

monitor host hank:8002
monitor on ax2 i o t
monitor on ax3 i o t
monitor on ax4 i o t
monitor on ax5 i o t
monitor on ax6 i o t
monitor on ax7 i o t

; Link RoundTable to these nodes.

rt link bvrcrk:kb7zpj-6
rt link cedar:k7iqi-1
rt link hcknsn:n7yss-1
rt link greshm:ka7agh-1
rt link pareta:w0rli-3
rt link wville:kc7zzx-1

; Start up timed events.

cron from 00 to 23 each 10 at 5   "mbox forward"
cron from 00 to 23 each 30 at 6   "expire kick"
;cron from 00 to 23 each  5 at 8   "kiss update"
cron from 02 to 02 each 60 at 0   "wp clean"
cron from 00 to 23 each 60 at now "netrom bc"
cron from 00 to 23 each 30 at 0   "netrom id"
cron from 00 to 23 each 20 at 5   "digi send w0rli-1 beacon all beacon1.txt"
cron from 00 to 23 each 20 at 15  "digi send w0rli-1 beacon all beacon2.txt"
If home
cron from 00 to 23 each 60 at 9   "cron sync nist1.datum.com"
Else
cron from 00 to 23 each 60 at 9   "cron sync cedar"
EndIf

; Route information.

; Systems on the house ethernet done via the netmask on et1.
; All non ham radio routes to hank
; Note the "route addp" vs. "route add".
; For the private routes, we expect to get more general routing
; from that system via rip.

If home
route addp default et1 silver 10
Else
route addp default ax2 cedar 10
EndIf

If rtegresh
arp add greshm netrom ka7agh-1
route addp greshm netrom direct
rip add greshm
EndIf