; This is startup for vervfd.w7ver

; *** Conditional startup.

Set kpc1    true
Set doax1   false

; *** Basic setup.

; System identification:
;   host name, IP address, AX.25 and NET/ROM callsigns:

ip     address   44.116.10.65
domain name      wville.w7ver.ampr.org
mbox   haddress  w7ver.or.usa.noam
ax25   bbscall   verfmb:w7ver-2  ; BBS callsign and outgoing connects.
ax25   mycall    vervfd:w7ver-3  ; Node call.

;log cron   on
;log expire on
;log ftp    on
;log http   on
;log nntp   on
;log pop    on
;log proc   on
;log rt     on
;log shut   on
;log start  on

intq 8:80 8:297 16:575 0:1520

wp update pdx
netrom minqual 80
domain add paret 5

nw avoid kd7hah-2

; *** Interfaces.

; Ethernet.

attach packet 0x60 et1 1520
ifconfig description et1 "House Ethernet"
ifconfig netmask     et1 255.255.255.224
ifconfig broadcast   et1 44.116.10.95
tcp window           et1 8192
tcp retries          et1 20

If doax1

attach bpqenet 0x60 ax1 256 240
ifconfig description ax1 "House Ethernet"
ax25 maxframe  ax1     7
ax25 maxframee ax1    20
ax25 speed     ax1  64000

EndIf

; Serial ports.

attach com com1 0x3f8 4 1024 64 19200
ifconfig description com1 "com1"

attach com com2 0x2f8 3 1024 64 19200
ifconfig description com2 "com2"

; Kantronics KPC9612.

If kpc1

attach kiss ax2 com1 0 256 200 a
ifconfig description ax2 "145.610 1200 baud"
ax25 speed    ax2 1200
kiss TxDelay  ax2  300
kiss TxTail   ax2   30
kiss Persist  ax2  255  ; Persist
kiss SlotTime ax2  100  ; Slot time in ms.
kiss FullDup  ax2    0

attach kiss ax3 com1 1 256 224 a
ifconfig description ax3 "No Radio 9600 baud"
ax25 speed    ax3 9600
kiss TxDelay  ax3   80
kiss TxTail   ax3   20
kiss Persist  ax3  255
kiss SlotTime ax3  100  ; Slot time in ms.
kiss FullDup  ax3    0

EndIf

; Monitoring

;monitor host p550:8002
;monitor on ax2 i o t
;monitor on ax3 i o t
;monitor on ax4 i o t
;monitor on ax5 i o t
;monitor on et1 i o t

; Link RoundTable to these nodes.

rt link hcknsn:w0rli-1

; All definitions and parameter settings are done.
; Start network services.

start

; Start up timed events.

cron from 00 to 23 each 10 at 5  "mbox forward"
cron from 00 to 23 each 30 at 6  "expire kick"
cron from 00 to 23 each  5 at 8  "kiss update"
cron from 02 to 02 each 60 at 0  "wp clean"
cron from 00 to 23 each 30 at 0  "netrom id"
cron from 00 to 23 each 60 at 9  "cron sync paret"
cron from 00 to 23 each 20 at 5  "digi send w7ver-1 beacon all beacon.txt"

; Do commands that use the network.

; Route information.

; Systems on the house ethernet done via the netmask on et1.
; Note the "route addp" vs. "route add".
; For the private routes, we expect to get more general routing
; from that system via rip.

;route addp default et1 holly 10

; Populate our routing table.
; Send our routing table.

arp poll
wait 5
rip kick
wait 5
rip request

; Broadcast our node list.

netrom bcnodes